Table of Contents
Advertisement
SWITCHING TO PS
WAIT FOR IDLE PRINTER
WARMING UP
Error Messages
The following error messages require operator intervention; they are listed
numerically.
02 TONER LOW
|
|
|
|
|
03 2000 SHEET INPUT COVER OPEN
Meaning: The printer is switching to PostScript.
Action: None required.
Meaning: You attempted to print from the Test Menu while the
printer was processing PCL, PostScript, or IPDS data.
Action: When a port timeout occurs for the data stream (PCL5e,
PostScript, or IPDS), the Ready message appears on the operator
panel. Wait for the Ready message and then try printing again.
Meaning: The printer is warming up. When it is warm, it displays the
READY message.
Action: None required. If the message seems to appear too frequently,
change the value for the power-saving mode to a larger value. See
"Changing the Power Savings (Sleep Mode) Interval" on page 31 for
instructions on how to change the setting.
If the message displays for several minutes, the printer controller
connection may be bad. In this case, call for service.
Meaning: The toner in the printer cartridge is low.
Action: Press the Continue key to continue printing (the TONER
LOW message remains on the display). Ensure that a new toner
cartridge is available. When the print quality becomes unacceptable,
install the new toner cartridge (see "Changing the Toner Cartridge" on
page 132 ).
Note: The TONER LOW item on the Configuration Menu lets you
specify whether or not you want the printer to stop printing
when it detects a TONER LOW condition. See "Configuration
(Config) Menu" on page 95.
Meaning: The cover at the back of the 2000-Sheet Input Drawer is
open.
Appendix C. Printer Messages
213
Advertisement
Table of Contents
