Loading Envelopes Into The Envelope Tray - IBM InfoPrint 20 User Manual

Loading Envelopes into the Envelope Tray

Notes
1. The printer refers to the envelope tray as Tray 1, Tray 2, or Tray 3,
depending on which paper tray the envelope tray replaces.
2. Many applications allow you to specify the input tray you want to
use. This value will override any value set at the printer. If your
application does not let you pick an input tray, use the Paper Menu
to select the tray.
To select the envelope tray, set SOURCE to TRAY1, TRAY2, or TRAY3
(see "Selecting The Default Input Tray" on page 63).
Use the following procedure to load envelopes into the envelope tray (the
envelope tray replaces the 500-sheet tray):
1. See "Selecting Paper and Other Printable Material" on page 34 and
"Envelope Tray Paper Specifications" on page 39 for information on media
you can load.
2. Remove the envelope tray from the printer and place on a flat surface.
56
InfoPrint 20: User's Guide -- CD Version