Table of Contents
Advertisement
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 MANUALLY LOAD paper_size IN AUX
14 ADJUST PAPER GUIDES IN TRAY n
15 2000 SHEET INPUT NOT READY
16 TRAY n MISSING
17 tray OPTION ERROR
v If you are printing a printer configuration page, make sure Letter or
A4-size paper is loaded in the default tray.
v If you specified a different tray, and you do not want to use the
tray specified in the message, you can do the following:
1. Reset the printer by doing one of the following:
a. Selecting RESET PRINTER from the Reset Menu (see "Reset
Menu" on page 90).
b. Powering the printer off and then powering it back on.
2. Load the correct paper size in the tray you want to use.
3. Resubmit the job.
v You can exclude trays from the tray switching search sequence. See
the descriptions for the Paper Menu Items TRAY1 PROT, TRAY2
PROT, TRAY3 PROT, and AUXTRAYPROT in "Paper Menu" on
page 90 .
Meaning: The auxiliary tray requires paper. The message indicates the
required size (paper_size).
Action: Place another sheet of paper or other media in the auxiliary
tray and press the Continue key. If you receive this message and you
do not want to use the manual printing function, set MANUAL to
OFF on the Paper Menu or using your printer driver. See "Paper
Menu" on page 90.
Meaning: Paper guides in the specified tray need adjusting.
Action: Adjust the paper guides. See "Loading the A4/Letter Paper
Tray" on page 41 or "Loading the A3/Ledger (11 x 17) Paper Tray" on
page 45 .
Meaning: The elevator mechanism in the 2000-Sheet Input Drawer is
moving or out of position.
Action: Wait for the elevator to stop moving. Make sure the
2000-Sheet Input Drawer drawer is properly in place.
Meaning: The paper tray is not closed or installed.
Action: Open and close the tray. If you have not installed the tray, do
so at this time.
Meaning: An optional paper tray was detected previously, but is no
longer detected.
Appendix C. Printer Messages
215
Advertisement
Table of Contents
