Table of Contents
Advertisement
b. Loosen the two thumbscrews as shown. The screws do not detach
from the fuser.
c. Holding the fuser by the handles, lift the right side of the fuser, slide
the fuser to the right to free the left end of the fuser from the clamp,
and lift the fuser up to remove it.
6. To install the new fuser, do the following:
a. Slide the left end of new fuser into the clamp and lower the fuser into
place, taking care to insert the connector on the bottom of the fuser
Chapter 7. Maintaining the Printer
137
Advertisement
Table of Contents
