Table of Contents
Advertisement
4. If you see the message WAIT FOR IDLE PRINTER while performing a Test
|
Menu item, wait until you see the READY prompt and try again. If the
|
PCL Menu item AUTO RESET is set to OFF, you may not get the READY
|
prompt even if you see the WAIT FOR IDLE PRINTER message. In this
|
case, set AUTO RESET to ON to restore Test Menu functions.
|
Test Menu Item
CONFIG PAGE
PRINT PS FONTS
PRINT PCL FONTS
PRINT PCL DEMO
CONTINUOUS TEST
PRINT TR CONFIG
PRINT EN CONFIG
PRINT IPDS FONTS
PRINT SCS CHARS
FORMAT DISK
ONLINE HEX PRT
|
CANCEL HEX PRT
|
|
|
| |
CX HEX PRT
|
CANCEL CX PRT
|
|
| |
TX HEX PRT
|
CANCEL TX PRT
|
|
| |
Description
Prints the printer configuration page. Make sure Letter or A4 paper is
loaded in the default tray. See "Selecting The Default Input Tray" on page 63
for more information.
Prints a list of PostScript fonts installed on the printer. See "Printing a List
of PostScript Fonts" on page 30 for more information.
Prints a list of PCL5e fonts installed on the printer. See "Printing a List of
PCL5e Fonts" on page 29 for more information.
Prints the demo page.
Prints continuous test pages. To stop the test, press the Cancel Print key.
Prints a configuration page for the token-ring network interface card. See
"Printing the Token-Ring Network Interface Card Configuration Page" on
page 29 for more information.
Prints a configuration page for the Ethernet network interface card. See
"Printing the Ethernet Network Interface Card Configuration Page" on
page 29 for more information.
Prints a list of IPDS fonts installed on the printer.
Prints the SCS code page (character set).
Formats the optional hard drive.
ONLINE HEX PRINT prints a hexadecimal dump for troubleshooting
purposes. Use this option for PostScript or PCL jobs sent over the parallel,
Ethernet, or token-ring attachments. After you select this item, it changes to
CANCEL HEX PRT. To cancel the dump, select CANCEL HEX PRT.
Note: Do not use ONLINE HEX PRT for IPDS jobs.
CX HEX PRT prints a hexadecimal dump for troubleshooting problems with
non-IPDS jobs sent over the coax attachment. After you select this item, it
changes to CANCEL CX PRT. To cancel the dump, select CANCEL CX PRT.
Note: Do not use CX HEX PRT for IPDS jobs.
TX HEX PRT prints a hexadecimal dump for troubleshooting problems with
non-IPDS jobs sent over the twinax attachment. After you select this item, it
changes to CANCEL TX PRT. To cancel the dump, select CANCEL TX PRT.
Note: Do not use TX HEX PRT for IPDS jobs.
Chapter 6. Operator Panel Menus
89
Advertisement
Table of Contents
