5. The printer displays the message WARMING UP... while it warms up (this
usually takes a little longer than a minute). When the printer is ready, it
displays the message READY.
Selecting a Language
Important!
English is the default language for messages and menus. If you use
English, skip this procedure.
To display messages and menus in a language other than English, do the
following:
1. Press the Online key once; you see OFFLINE in the message display area.
2. Press the Menu key until you see LANGUAGE MENU in the message
display area. Then press the Item key until you see LANG=ENGLISH.
3. Press the Value key until you see the language you want to select.
4. To change the value, press the Enter key. An asterisk appears next to the
language you select, indicating that it is now active.
5. Press the Online key to make the printer ready. You see the READY
message in the language you selected.
Chapter 2. Installing Your Printer
15