Table of Contents
Advertisement
Coax SCS Menu
Item
TRAY1
COR*
TRAY2
C-PORT
TRAY3
PORT
AUX
LAND
Value
Specifies the default orientation for jobs printed from each
tray. TRAY1 is the standard 500-sheet input tray. TRAY2 is
the lower 500-sheet input tray if one optional 500-sheet tray
is installed, it is the middle 500-sheet tray if two optional
500-sheet trays are installed. TRAY3 is the lowest 500-sheet
tray when two optional 500-sheet trays are installed. Each
input can be assigned one of the following default
orientations:
v COR—computer output reduction: Printing in landscape
with the logical page reduced to fit more data on the
physical page. The printer reduces vertical spacing and
uses a smaller font with less space between letters.
v C-PORT—compressed portrait: printing in portrait, but
with horizontal and vertical compression.
Horizontal compression makes it possible to print 80
characters per line in portrait when 10 cpi is used and
133 characters per line when 16.7 cpi is used. The
horizontal compression factor differs depending on paper
size used. Because of this, no horizontal compression can
be seen when Letter paper is used because Letter paper
in portrait already allows 80 characters in 10 cpi.
Vertical compression makes it possible to print 66 lines
per page in 6 LPI or 88 lines per page in 8 LPI. The
vertical compression factor also varies depending on the
paper size used.
v PORT—portrait: the page has normal, upright business
letter orientation. For envelopes from the auxiliary tray,
PORT specifies normal envelope orientation.
v LAND—landscape: the page is wider than long.
Description
Chapter 6. Operator Panel Menus
117
Advertisement
Table of Contents
