Locking The Program Mode; Entering Program Mode; Printing The Current Configuration - IBM 6500 User Manual

Locking The Program Mode

When Program mode is locked, you cannot use the operator panel to change the
configuration settings. However, you can still select the configuration menus and
view the current configuration settings.
Press the Return + Enter keys at the same time to lock Program mode. The
following message will appear briefly:

Entering Program Mode

To place the printer in Program mode, press the MENU key.

Printing the Current Configuration

Step
1. Make sure the printer is on
2. Press
3.
4.
5.
24
Infoprint 6500 User's Manual
OPERATOR MENU
LOCKED
Key LCD Result
STOP NOT READY
CONFIG PRESS START TO PRINT
PRESS STOP TO EXIT
START NOT READY
START READY
Notes
The printer must be in NOT READY
mode to print the configuration.
You are prompted to press the Start key
before the configuration prints.
Indicates that the configuration has
printed. Date and store the printout in a
safe place. You may also want to label
the printout (for example,
"Configuration for 2-up Labels").
The printer is READY for normal
operation.