4 Operation and Configuration
4.3 Web Configuration
The printer can be operated through a web configuration page using any browser.
With an Ethernet LAN or WLAN connection, users can remotely get information from the printer or
perform the printer configuration.
You need the printer IP address to access the web configuration page. Refer to
Section 4.2.16
Information Mode
for the printer IP address.
If the printer IP address is 192.168.143.123, open up browser and enter the following URL:
192.168.143.123
When a security certificate is prompted, you must acknowledge and click Continue.
The web configuration page will be shown as follows.
On the upper right of each page, the model name, current resolution and MAC address are shown.
Display Status section shows specific information or status of the printer while Printer Configuration
section allows users to perform adjustments and other printer operations.
You can view Information, External signal Status and Sensor level pages without logging in.
However, login is required to view Printer Configuration pages such as Adjustment mode and etc.
4.3.1
Information
Information is the default page of web configuration.
The Information page is shown as follows.
Refer to
Section 4.2.16 Information
Mode.
198
S84-ex/S86-ex Operator Manual