Setting Mode Menu - SATO S84ex Operator's Manual

4.2.8

Setting Mode Menu

In the settings mode menu, the setting modes are shown as follows:
Menu
Online mode
User mode
Interface mode
Memory mode
Service mode
Advanced mode
Hex dump mode
RFID user mode
Information mode
Select the setting mode according to the following procedure:
1
Press the LINE button to change the
printer to offline mode.
The printer changes to offline mode.
2
Press the ENTER button.
The printer changes to the setting mode menu.
3
Select the setting mode using the
buttons.
/ / /
The selected setting mode shows on the screen and
the icon is highlighted by inverting its colors.
4
Press the ENTER button to enter the selected mode.
Returns to online mode.
Access the settings related to the basic user configurations.
Access the settings related to the interfaces.
Access the settings related to the memory.
Access the settings related to the media sensor adjustment and various
functions activation.
Access the settings related to the advanced printer configurations.
Access and print the hex dump for troubleshooting.
Access the settings related to the optional RFID module.
Shows only if you have installed the optional RFID kit and enabled the RFID
mode.
Access the information of this printer.
4 Operation and Configuration
Description
S84-ex/S86-ex Operator Manual
69