Szpl Emulation Mode - SATO S84ex Operator's Manual

5 Emulation Mode

5.2 SZPL Emulation Mode

The SZPL Emulation Mode is available when the printer is loaded with SZPL Emulation firmware. The
RFID option is not supported in this emulation firmware.
The flowchart shows the sequence of the setting screens for the SZPL emulation firmware. The table
describes each setting screen in detail.
Shows only when the
PASSWORD input is enabled
Shows only when the LCD is
selected in SIZE MODE.
230 S84-ex/S86-ex Operator Manual
button
button
(1X), (2X) button
button
button
button
button
button
button
button
button
button
button
button
button
button
s
button
button
button
button
button
button
* Press the , , or
to select an item or set the
value accordingly. The active
arrow icons are shown on the
screen.
* Pressing the button on each
screen will revert to the
EMULATION MODE menu.
button
button
button
button
button
button
button
button