Adjustment Mode - SATO S84ex Operator's Manual

4.2.5

Adjustment Mode

The printer has a quick access to the adjustment mode for setting the print position, stop position and
print darkness. These adjustments are in conjunction with the configuration adjustments performed in
the user mode menu.
1
When the printer is in online or offline mode, press the
second to enter the adjustment mode. PITCH POSITION shows on the screen.
2
Press the / buttons to set the desired value and press the
save the setting and proceed to the next adjustment screen.
PITCH POSITION
Offset the print position in the vertical direction.
Set the offset value with '+' to move the print position opposite the feed
direction and value with '-' to move the print position in the feed direction.
The setting value is adjustable by 0.25 mm (0.01") regardless of the print
resolution.
The setting range is from -3.75 mm (-0.15") to +3.75 mm (+0.15").
OFFSET POSITON
Correct the offset position.
Offset position refers to the dispense stop position.
Set the offset value with '+' to move the stop position opposite the feed
direction and value with '-' to move the stop position in the feed direction.
The setting value is adjustable by 0.25 mm (0.01") regardless of the print
resolution.
The setting range is from -3.75 mm (-0.15") to +3.75 mm (+0.15").
+ buttons (press for 1 second)
button
Press the or
button
4 Operation and Configuration
* Press the or button to set the value.
button button
and buttons for one
ENTER button to
S84-ex/S86-ex Operator Manual
61