4.2.20 Upload Mode
The upload feature allows the operator to upload data (firmware, font/logo, TrueType font, configuration,
status5 log) from the printer and write it to an SD card or USB memory. When uploading is complete, the
LCD screen will return to the original screen after three seconds. If an error occurs, an error message will
show and the reason will be identified.
CAUTION
Be sure to perform a virus check for the USB memory or SD card before connecting it to the printer. SATO
Corporation shall not be held responsible for a malfunction of the printer caused by a virus infection through
the USB memory or SD card.
Press
+ Power On
completed?
・ If the item selected on the UPLOAD SELECT screen does not have
button
data to be uploaded, nothing will be uploaded.
・ Selecting ALL will upload all the items on the UPLOAD SELECT
screen.
・ Screen messages are shown in English regardless of the setting
value on the SELECT LANGUAGE screen.
button
button
Upload
Yes
No
Reading the data
Finished receiving the uploaded data
Writing the data
Finished writing the uploaded data
3 short beeps when the upload
is completed
4 Operation and Configuration
button
S84-ex/S86-ex Operator Manual
189