Site Survey Mode - SATO S84ex Operator's Manual

4 Operation and Configuration

4.2.23 Site Survey Mode

This mode allows you to acquire the information of access points.
The flowchart shows the sequence of the setting screens for the site survey mode. The table describes
each setting screen in detail.
Infrastructure is selected
in the WIRELESS MODE
of the WLAN
interface setting.
button
button
194
S84-ex/S86-ex Operator Manual
+ +
Power on
Ad Hoc is selected in the WIRELESS
MODE of the WLAN interface setting.
Site survey mode stops when
powered off.
(1) (3) (4) (5)
button
button
button
button
button
button
button
button
button
button
button
Print completion
Site survey mode stops when
powered off.
(1) (2)
button
button
(1) The order of field intensity (1 is stronger)
(2) MAC address
(3) MAC address (lower 6 digits)
(4) Used channel
(5) RSSI value [dBm] (absolute value)
* In Site survey mode, the printer prints only one
label. After the print completion or error release, the
printer returns to the list screen.
button
When AP is not found