Limitation On Base Reference Point Adjustment - SATO S84ex Operator's Manual

6.3.5

Limitation on Base Reference Point Adjustment

After adjusting the print position and stop position, the distance between these two positions should not
exceed one pitch size (including liner) of the media.
Refer to the figure and table below for the adjustment range of the distance between the print position
and the stop position for options.
Adjustment range of the distance between the print position and the stop position for options:
Types of Options
Dispenser
Stop position
for options
(Initial)
Initial distance
Adjusted distance
(Min.)
+3.75 mm -3.75 mm +3.75 mm
(+0.15") (-0.15") (+0.15")
Adjusted distance (Max.)
Adjusted Distance
(Min.)
7.5 mm (0.3")
6 Cleaning and Performing Printer Adjustments
Print position
(Initial)
The range of the adjusted distance includes
the base reference point of two media.
-3.75 mm
(-0.15")
Adjusted Distance
Initial Distance
15.0 mm (0.6")
S84-ex/S86-ex Operator Manual
(Max.)
22.5 mm (0.9")
251