SATO S84ex Operator's Manual page 155

UPDATED SETTING
This screen shows that the input/output signal setting has been updated.
Power on the printer again to make the setting effective.
I/O SIGNALS INITIALIZE
Select whether or not to initialize the pin number for the input/output signal.
• YES: Proceed to the INITIALIZED SETTING screen.
• NO: Proceed to the ZERO SLASH screen.
Note
Refer to the default value of the pin number in
SIGNAL.
INITIALIZED SETTING
This screen shows that the pin number for the input/output signal has been
initialized.
Power on the printer again to make the setting effective.
ZERO SLASH
Set whether to print the number zero (0) with or without a slash (/).
• YES: Print zero with a slash.
• NO: Print zero without a slash.
INPUT SIGNAL/OUTPUT
4 Operation and Configuration
S84-ex/S86-ex Operator Manual
153