Simple Standalone Mode - SATO S84ex Operator's Manual

4.2.7

Simple Standalone Mode

This mode allows the printer to function independently from a host computer once a fixed format has
been sent and saved to the SD card or USB memory.
The data may be saved to the SD card or USB memory while in the print buffer, then recalled later with a
new print quantity specified. The SD card or USB memory can hold a maximum of ninety nine formats.
However, one file number will only hold a single format; new format will overwrite the existing saved
format. The host computer must be reconnected to the printer to overwrite an existing format.
The flowchart shows the sequence of the setting screens for the simple standalone mode. The table
describes each setting screen in detail.
button
button
Select NO +
button
or button
button (Press for 5 seconds)
Select LOAD
+ button
Select SAVE
button
+ button
button
button
button
button
button
Select YES
+ button
button
4 Operation and Configuration
* Press the , , or
select an item or set the value
accordingly. The active arrow icons
are shown on the screen.
button
button
button
button
button
button
button
button
button
button
button
S84-ex/S86-ex Operator Manual
button to
Shows only when there is
sequential data.
65