Ribbon Specification For The Ribbon Saver; Label Specification For The Ribbon Saver - SATO S84ex Operator's Manual

8.10.4 Ribbon Specification for the Ribbon Saver

Ribbon width
Ribbon length
Up to 300 m roll
(Under 69 mm in diameter)
Up to 500 m roll
(Under 82 mm in diameter)
Up to 600 m roll
(Under 108 mm in diameter)
• Be sure to remove the used ribbon at the rewinder side and replace the paper core with a new one
when using up one roll of ribbon.
• Be sure to perform the preliminary operation check because the lengths of ribbon mentioned above
are calculated from mechanical structure and have a limitation according to the type of ribbon,
operating environment and usage.

8.10.5 Label Specification for the Ribbon Saver

Label width
Label pitch Backfeed
No backfeed
39.5 mm or more
Guaranteed operation speed of ribbon saver
2 to 12 inches (more than 15 mm of printing)
2 to 12 inches (more than 20 mm of printing)
2 to 6 inches (more than 30 mm of printing)
30 mm or more
25 mm or more
60 mm or more
8 Appendix
S84-ex/S86-ex Operator Manual 337