3 Loading the Ribbon and Media
2
Turn the head lock lever clockwise to
unlock the print head.
3
Pull the feed lock latch to unlock the
feed roller and media sensor assembly
.
The feed roller and media sensor assembly will flip
open.
4
Pull the media guide away from the
printer.
5
Pass the media between the media shaft
, below the feed roller and media
sensor assembly , and the print head
assembly and extend it out the
discharge outlet.
Make sure that the end of the media extends out the
discharge outlet.
6
Push the media until the innermost edge of
the media lightly touches the printer center
frame.
7
Pull the label out from the discharge outlet.
Remove about 30 cm (11.8") of labels
from the liner .
44
S84-ex/S86-ex Operator Manual
4
3
3
5
1
2
6
7
8