8
Push the pressure roller release tab up
to release the pressure roller plate .
9
Pass the liner through the gap of the
pressure roller plate .
10
Push the center of the pressure roller
plate to latch it in place.
11
Turn the head lock lever counterclockwise
to lock the print head.
12
Close the top cover.
13
After loading the media and ribbon, perform
a test print to make sure that the media is
loaded correctly.
Refer to the
Section 4.2.17 Test Print Mode
details on how to perform a test print.
CAUTION
When closing the top cover, be careful not to pinch your fingers.
9
for
3 Loading the Ribbon and Media
10
10
10
S84-ex/S86-ex Operator Manual
8
8
45