Leave A Bridge Call; Resume Held Calls; Enabling Privacy - Polycom VVX 101 User Manual

Polycom VVX Business Media Phones User Guide
2 Select the Barge In soft key, as shown next, and lift the handset.
A bridge tone plays notifying the other call participants that you are barging in on the call.

Leave a Bridge Call

Any member in a bridge call can leave the call, and the call remains active.
To leave a bridge call:
» Select the End Call soft key, or place the handset in the cradle.
Your connection to the bridge call is ended, and the other call participants remain on the call.
You can rejoin a bridge call after leaving by pressing the Barge In soft key again.

Resume Held Calls

Any MADN member can resume a held call on the shared line. When an active call is placed on hold on the
shared line, all group members are notified of the call's new status by a flashing red LED light on the line
key on all members' phones, if enabled by your system administrator.
To resume a call on the shared line:
» Do one of the following:
 Select the corresponding line key and lift the handset.
 Press and hold the corresponding line key and select Resume.
When a held call is resumed by another MADN member, the other group members are notified of the call's
new status with a steady red LED light on the line key on the members' phone.

Enabling Privacy

Any MADN member can temporarily enable privacy for an active or bridge call on a public shared line using
privacy codes or privacy soft keys configured by your system administrator. Additionally, MADN members
can use privacy codes and soft keys to temporarily disable privacy on an active call on a private shared line.
The following are three types of privacy codes that you can use to enable and disable privacy on a shared
line:
Polycom, Inc. 91