Answering a MADN Call
Any incoming call to the shared line rings on all group members' phones simultaneously. The call is
displayed on all members' screens, and a green LED light flashes on the line's line key.
Any MADN member can respond to an incoming call to the shared line. When a MADN member
answers an incoming call, the LED indicator on the line key for all phones changes to a steady red light
to indicate the call was answered. Members can also view the status of a call on the shared line by
pressing and holding the corresponding line key for one second. The call's status and the Barge In soft
key display for five seconds.
If bridging is disabled and privacy is enabled for the shared line, you cannot barge in on active calls
answered by other MADN members.
Related Topics
Ribbon Communications Multiple Appearance Directory Number - Single Call Appearance
Barge In on an Active Call
After a call is answered, any group member can barge in on the active call on a public shared line,
which becomes a bridge call—a call between two or more MADN members and another party.
Ask your system administrator about the maximum number of participants allowed on a bridge call.
Procedure
1 Press and hold the corresponding line key for the shared line for one second.
2 Select the Barge In soft key.
A bridge tone plays notifying the other call participants that you are barging in on the call.
Related Topics
Ribbon Communications Multiple Appearance Directory Number - Single Call Appearance
Leave a Bridge Call
Any member in a bridge call can leave the call, and the call remains active.
After you leave a bridge call, you can rejoin by pressing the Barge In soft key again.
Procedure
•
Select the End Call soft key, or place the handset in the cradle.
Your connection to the bridge call is ended, and the other call participants remain on the call.
Printed from Polycom, Inc. (http://documents.polycom.com)
#{renderLang "en" MsgPDFPage} 78
Need help?
Do you have a question about the VVX 150 and is the answer not in the manual?