Change Timeouts; Changing Audio Settings; Change Incoming Call Notifications - Polycom VVX 101 User Manual

Polycom VVX Business Media Phones User Guide

Change Timeouts

You can update the period of time the phone is idle before the screen turns off. You can specify different
timeouts for office hours (Office Hours Idle Timeout) and non-office hours (Off Hours Idle Timeout). By
default, the Office Hours Idle Timeout is much longer than the Off Hours Idle Timeout.
You can also specify a separate timeout period that applies after you press a key or tap the screen. This is
called the User Input Idle Timeout. You can choose to set a higher User Input Idle Timeout than the Office
Hours and Off Hours Idle Timeouts so that when you're actively using the phone, power-saving mode
doesn't initiate as often.
Tip: Determining which idle timeout applies
If you press a key or tap the screen, the idle timeout period that applies (User Input Idle Timeout or
Office Hours/Off Hours Idle Timeout) is the timeout with the highest value.
To change timeouts:
1 Navigate to Settings > Basic > Power Saving > Timeouts.
On VVX 1500 phones, navigate to Menu > Settings > Basic > Power Saving > Timeouts.
2 Select Office Hours Idle Timeout, and enter the number of minutes the phone should wait, during
office hours, before starting power-saving mode. Enter a number between 1 minute and 600
minutes. The default is 10 minutes.
3 Select Off Hours Idle Timeout, and enter the number of minutes the phone should wait, during
off-hours, before starting power-saving mode. Enter a number between 1 minute and 10 minutes.
The default is 1 minute.
4 Select User Input Idle Timeout, and enter the number of minutes the phone should wait after a key
press or screen select before starting power-saving mode. Enter a number between 1 minute and
10 minutes. The default is 10 minutes.
5 Select Save.

Changing Audio Settings

You can change the following audio settings for your phone:
●

Change Incoming Call Notifications

●
Set a Ringtone for Incoming Calls
●
Set a Ringtone for Individual Contacts
●
Change the Volume
Change Incoming Call Notifications
You can choose whether you hear sound effects—all phone sounds except call audio—from the handset,
headset, speaker, or the active audio device you set. For example, you can configure your phone to ring on
your headset instead of the speaker. By default, you hear all sound effects from the speaker.
Polycom, Inc. 184