Disable Screen Savers - Polycom VVX 101 User Manual

Polycom VVX Business Media Phones User Guide
6 Select Save.
If the message "No pictures found" displays after you select Save, there are no pictures in the folder
you specified or in the root directory. Go back and make sure the information you entered is correct.
7 Navigate to Settings > Basic > Preferences > Screen Saver.
8 From the Screen Saver screen, select Screen Saver, and select Enabled.
9 Select Wait Time, and enter the number of minutes the phone should wait, after no activity, before
displaying the screen saver.
You can enter any time between one minute and of 9999 minutes. The default is 15 minutes.
10 Select Save.
Your phone displays the screen saver after the number of minutes you specified in the Wait Time field.
Troubleshooting: Why is my USB flash drive not displaying on my phone?
If your phone does not detect the USB flash drive when you attach it to your phone, the USB port on
your phone may be disabled. Contact your system administrator and view the section
Issues for more information.
Tip: Using your phone as a digital picture frame
You can set up your phone to use a single picture to display or have all pictures display in slide-show
style. This is an alternative to setting up a screen saver, and it automatically starts each time your
phone is idle a certain amount of time. For more information, see the section
Digital Picture

Disable Screen Savers

You can stop a screen saver at any time by touching the screen. After your phone is idle for the specified
period of time, the screen saver starts again.
You can disable a screen saver—prevent it from starting, even if your phone has been idle for the specified
period of time—by doing the following:
● Removing the USB flash drive. The screen saver does not display until you attach the USB flash drive
again, and your phone is idle for the period of time you specified.
● Disabling the Screen Saver setting. When you disable the setting, the screen saver does not display,
even though the USB flash drive is still attached.
To disable the Screen Saver setting:
1 Navigate to Settings > Basic > Preferences > Screen Saver.
On VVX 1500 phones, navigate to Menu > Settings > Basic > Preferences > Picture Frame.
2 From the Screen Saver screen, select Screen Saver, and select Disabled.
3 Select Save.
Polycom, Inc.
Frame.
USB Port
Use Your Phone as a
181