Configuring An Inner-Outer Vlan 802.1P Priority Mapping - HP A6600 Configuration Manual

To do...
12. Enter
Ethernet
interface
view or port
group view
of the
customer
network-side
port
13. Enable basic QinQ
14. Apply the QoS policy to the
incoming traffic

Configuring an inner-outer VLAN 802.1p priority mapping

The A6600 routers can mark the 802.1p priorities in outer VLAN tags according to the inner VLAN IDs or
the 802.1p priorities in the inner VLAN tags through QoS policies:
To mark the 802.1p priorities in outer VLAN tags according to the inner VLAN IDs or the 802.1p
priorities in the inner VLAN tags:
To do...
1. Enter system view
2. Create a class and enter class
view
3. Configure
a match
criterion
4. Return to system view
5. Create a traffic behavior and
enter traffic behavior view
6. Configure the action of
marking the 802.1p priorities
in outer VLAN tags
7. Return to system view
8. Create a QoS policy and
enter QoS policy view
Use the command...
Enter Ethernet interface interface-type
interface view interface-number
Enter port port-group manual
group view port-group-name
qing enable
qos apply policy policy-name
inbound
Use the command...
system-view
traffic classifier classifier-name
[ operator { and | or } ]
Configure a
match criterion
if-match customer-vlan-id
to match the
vlan-id-list
specified inner
VLAN IDs
Configure a
match criterion
to match the if-match customer-dot1p
specified inner 8021p-list
VLAN tag
priorities
quit
traffic behavior behavior-name
remark dot1p 8021p
quit
qos policy policy-name
149
Remarks
Required.
Use either command.
Required.
Required.
Remarks
—
Required.
By default, the operator of a class
is AND.
Required.
Use either command.
—
Required.
Required.
—
Required.