Managing Security Logs - HP MSR Series Configuration Manual

Step
7. Configure the directory to
save the log files.
8. Manually save logs in the log
file buffer to a log file.
The following matrix shows feature and router compatibility:
Feature
Log file feature
Saving system information to a log file (MSR20-1X)
Task
Enable the log file feature.
Display whether the log file feature
is enabled.
The following matrix shows the feature and router compatibility:
Feature
Log file feature

Managing security logs

Security logs are very important for locating and troubleshooting network problems. Generally, security
logs are output together with other logs. It is difficult to identify security logs among all logs.
Command
info-center logfile switch-directory
dir-name
logfile save
MSR900 MSR93X
Yes. Yes.
Command
logfile { enable | disable }
display logfile status
MSR900 MSR93X
No No
MSR20-1
MSR20
X
No. Yes.
MSR20-1X MSR20
Yes No
189
Remarks
Optional.
By default, the log file is saved in
the logfile directory under the root
directory of the storage device (the
root directory of a storage device
varies with devices).
The configuration made by this
command cannot survive a system
reboot.
Optional.
Available in any view.
By default, the system saves logs in
the log file buffer to a log file at the
interval configured by the
info-center logfile frequency
command.
MSR30 MSR50
Yes. Yes.
Remarks
Optional.
Disabled by default.
To make the new configuration take
effect, reboot the router.
Optional.
MSR30 MSR50
No No
MSR1
000
Yes.
MSR100
0
No