Disassembling The Control-Head Interface - Tait TM9100 Service Manual

23.3.2

Disassembling the Control-Head Interface

Disassemble only as much as necessary to replace the defective parts or to
swap the Micromatch connector loom. Re-assembly is carried out in reverse
order of disassembly.
1.
2.
Figure 23.5 Parts of the control-head interface
B
x7
C
D
TM9100 Service Manual
© Tait Electronics Limited August 2005
Unscrew the seven PT type screws
Remove the control-head interface loom (not illustrated).
B
and remove the PCB
Description
B
3 x 8 PT screw (x7)
C
control-head interface PCB
D
control-head interface
control-head interface loom 219-02914-XX
a
Contact Technical Support for the exact IPN.
Installing an Enhanced Remote Kit
C
.
IPN
a
346-10030-XX
a
316-06842-XX
a
469