Cctm Commands For Fault Finding Of The Remote Control-Head Kit - Tait TM9100 Service Manual

The following CCTM commands are used during the fault finding of the
remote control-head kit:
Table 14.2 CCTM commands for fault finding of the remote control-head kit
CCTM command
1012 – Remote kit
turns the audio amplifier on and off
1013 – Mute audio amplifier
mutes and unmutes the audio amplifier
1014 – Digital potentiometer
reads the digital potentiometer
1017 – Audio amplifier gain
sets the audio amplifier gain (4 levels)
TM9100 Service Manual
© Tait Electronics Limited August 2005
Entry at keyboard
1012 0 = off
1012 1 = on
1012 0 = mute
1012 1 =unmute
1014
1017 x
where x is the gain (0 to 3)
Fault Finding of Control Head
Response on screen
none
none
value between 0 and
255
none
399