Rf Connector; Connectors Of The Control Head - Tait TM9100 Service Manual

Figure 2.9
2.3.1

RF Connector

The RF connector is the primary RF interface to the antenna. The RF
connector is a standard mini-UHF connector or a BNC connector with an
impedance of 50Ω.
Important
Table 2.1 RF connector - pins and signals
Pinout Pin
B C
rear view
36 Description

Connectors of the control head

microphone
connector
The maximum RF input level is +27dBm. Higher levels
may damage the radio.
Signal Name Signal Type
1 RF RF analog
2 GND RF ground
front view
control-head
connector
rear view without adapter flange
TM9100 Service Manual
© Tait Electronics Limited August 2005