Tait TM9100 User Manual

2 Additions to "For your safety" chapter (TP9100 only)
The following compliance information has been added.
USA public safety bands (764–776MHz and 794–806MHz)
Part 90R of the FCC Title 47 of the Code of Federal Regulations (CFR) deals with the use
of frequencies in the 764 to 776MHz and 794 to 806MHz bands.
Low-power channels
This radio complies with §90.531 (b) (3) and §90.531 (b) (4) of 47 CFR. These sections
state that only low-power transmission is permitted on the following channels:
Regional Planning channels, as defined in §90.531 (b) (3).
Itinerant channels, as defined in §90.531 (b) (4).
Use of encryption
This radio complies with §90.553 (a) of 47 CFR. This states that:
Encryption is not permitted on the nationwide Interoperability calling channels.
These channels are defined in §90.531 (b) (1) (ii).
Radios using encryption must have a readily accessible switch or control to allow the radio
user to disable encryption.
401-00007-00
TM9100 and TP9100 User's Guides
1 Introduction
This insert sheet contains information about
enhancements to the operation of TM9100 mobiles and
TP9100 portables. The topics covered in this
document are:
additional compliance information (TP9100 only)
using encryption
voting operation.
TM9100 mobiles
TP9100 portables
Insert Sheet
www.taitworld.com