Error Messages; Servicing Procedures - Tait TM9100 Service Manual

The radio may display an error message. Carry out the corrective actions
Task 8 —
Check
described in

Error Messages

Table 6.1 Error messages
Error message
Error E0001 Turn the radio off and then back on.
Unknown
Error E0002 Continue with servicing tasks to locate the problem.
Unknown
Error E0003 Re-download the radio's firmware.
Corrupt FW
Error E0008 Turn the radio off and then back on. If the system error persists, download new
System error radio firmware.
0xabcdefgh To capture details of the system error, use CCTM command
Temperature threshold Wait until the radio has cooled down.
exceeded
Cannot tx Go to
Out of lock Go to
Programming mode, Re-program the radio with a new programming database. If the problem persists,
invalid radio ... update or reload the radio's firmware, and re-program the radio's calibration
database.
144

Servicing Procedures

Table 6.1.
Corrective action
Task 9 on page 145.
"Frequency Synthesizer Fault Finding" on page 169.
204.
TM9100 Service Manual
© Tait Electronics Limited August 2005