Disassembly And Reassembly - Tait TM9100 Service Manual

5

Disassembly and Reassembly

This section describes how to:
Important
General
Disassemble only as much as necessary to replace the defective parts.
Inspect all disassembled parts for damage and replace them, if necessary.
Observe the torque settings indicated in the relevant figures.
For information on spare parts, refer to
TM9100 Service Manual
© Tait Electronics Limited August 2005
remove and mount the control head
disassemble and reassemble the radio body
disassemble and reassemble the control head
Before disassembling the radio, disconnect the radio from
any test equipment or power supply.
"Spare Parts" on page 421.
Disassembly and Reassembly 123