Topa-Sv-024 Test Unit; Test Setup - Tait TM9100 Service Manual

24

TOPA-SV-024 Test Unit

Figure 24.1
24.1

Test Setup

TM9100 Service Manual
© Tait Electronics Limited August 2005
The TOPA-SV-024 test unit is used to test and maintain Tait portable
and mobile radios by providing an interface between the radio, a test
PC, and an RF communications test set.
The diagram below shows the front panel of the test unit.
TOPA-SV-024 test unit
The diagram on the following page shows how the test unit is connected
to the radio, the test PC, and the RF communications test set.
Note
The test unit can also be connected to a Tait Orca portable
radio (TOP) using the TOPA-SV-007 cable, or to a T2000
radio using the T2000-11 cable. Use with Tait Orca and
T2000 radios is not described in this document.
TOPA-SV-024 Test Unit 477