Tmaa10-01 Desktop Microphone; Operation; Installation - Tait TM9100 Service Manual

19

TMAA10-01 Desktop Microphone

grille
PTT key
grommet
19.1

Operation

Hold down the monitor key and check whether the channel is clear.
If the channel is clear, press the PTT key to transmit. Speak clearly into the
microphone and release the PTT key when you have finished talking.
Note
19.2

Installation

Important
1.
2.
TM9100 Service Manual
© Tait Electronics Limited August 2005
The TMAA10-01 desktop microphone is an omnidirectional
dynamic microphone which can be used in dispatch
situations, where the microphone is positioned on a flat
surface. The desktop microphone plugs into the microphone
socket on the radio control head.
The desktop microphone has an internal pre-amplifier and an
adjustable sensitivity control on the underside of the desktop
microphone
microphone base.
base
monitor key
The monitor key can be locked in the 'on' position. To do this,
hold the monitor key down and slide the monitor key towards
you. The monitor key should now be locked on.
The desktop microphone grommet must be installed
whenever the desktop microphone is plugged into the
microphone socket. When installed, the grommet has two
functions:
to prevent damage to the microphone socket when
there is movement of the microphone cord, and
to ensure that the control head is sealed against water,
dust and other environmental hazards.
Plug the microphone cord into the microphone socket on the radio
control head.
Slide the grommet along the cord and push two adjacent corners of the
grommet into the microphone socket cavity.
TMAA10-01 Desktop Microphone 445