Product Codes; Radio Bodies; Control Head - Tait TM9100 Service Manual

1.4

Product Codes

This section describes the product codes used to identify products of the
TM9100 mobile radio product line.
The product codes of the TM9100 mobile radio product line have the
General
format:
where:
The product codes of the radio bodies have the format:

Radio Bodies

where:
The product code of the control head has the format:

Control Head

where:
16 Introduction
TMAabc–ddee
a identifies the product category:
A=accessory, B=radio body, C=control head, S=software feature
b, c, dd and ee identify specific product features.
TMAB3c–ddee
3 identifies the architecture of the digital board:
3=APCO digital
1 and 2 identify the digital boards of the analog TM8000 product line.
c identifies the RF output power:
2=25W, 4=30 to 59W, 5=30 to 59W (trigger-base)
dd identifies the frequency band:
B1=136 to 174MHz, H5=400 to 470MHz, H6=450 to 530MHz,
H7=450 to 520MHz
Other characters identify frequency bands of the analog TM8000
product line.
ee identifies any radio options:
00=BNC RF connector, 01=mini-UHF RF connector
TMAC41–dd
4 identifies the control-head type (4=graphical-display control head)
Other numbers identify control heads of the analog TM8000 product
line.
1 identifies the control-head configuration (1=APCO digital)
0 identifies the control-head configuration of the analog TM8000
product line.
dd identifies label and branding options.
TM9100 Service Manual
© Tait Electronics Limited August 2005