Messages From The Radio - Tait TM8100 Protocol Manual

1.10

Messages from the Radio

TM8100/TM8200 Computer-Controlled Data Interface (CCDI) Protocol Manual
© Tait Electronics Limited April 2007
The following messages are sent from the radio to the PC in conventional
mode. Some are solicited by commands from the PC, while others are
unsolicited and are sent because of changes within the radio.
Message
CCTM_QUERY_RESULTS
ERROR
GET_SDM
MODEL
PROGRESS
QUERY_DISPLAY_RESPONSE d
RADIO_SERIAL
RADIO_VERSIONS
RING
TDMA_DATA
TRANSACTION OK
The prompt character '.' is returned to the PC immediately after receiving a
command to signify that another may begin. If the command initiates a
return message, then when the return message has been sent the radio sends
another prompt.
If the radio sends an unsolicited message, it sends a prompt after the message.
Character Function
j Results from a CCTM query command
e Transaction failure or other error
condition
s Get original format SDM data
m Identify RU type
p Call progress report
Response from query display command
n RU serial number
v Version numbers of software
components
r Incoming call alert
z raw TDMA data
. Transaction processed OK
CCDI 39