Comtech EF Data DMD50 Installation And Operation Manual page 120

DMD50 Universal Satellite Modem
AUTHORIZATION
RD COMMUNITY
RDWR COMMUNITY
FTP (menu)
USER ID
PASSWORD
WEB
CONFIRMATION
USER 1
ACCESS GROUP
MN-DMD50– Revision 3
This controls the type of message format used when a message
trap is generated by the equipment and bound for a SNMP Host.
Messages will only be sent if the unit has been authorized to do
so.
{TRAPS OFF, TRAPS ON}
This controls the type of message format used when a message
trap is generated by the equipment and bound for a SNMP host.
Messages will only be sent if the unit has been authorized to do
so.
{16 characters of name}
This menu is only displayed when SNMP VERSION is set to V1
& V2.
This is the community that a host must be acting within when an
OID variable is requested by a V1/V2 SNMP message.
{16 characters of name}
This menu is only displayed when SNMP VERSION is set to V1
& V2.
This is the community that a host must be acting within when an
OID variable is being changed by a V1/V2 SNMP message.
Allows the user to enter the user identification for access to an
FTP session.
Allows the user to enter the password for access to an FTP
session.
{ENABLE, DISABLE}
{NO GROUP, GUEST, OPER, ADMIN}
Access rights represent the following:
No Group: Denies Access
Guest: Users are able to navigate most of the site, and view
modem parameter settings.
Oper: Users can monitor and and control parameter settings, and
change their own authentication passwords.
Admin: At this highest access right, the users can monitor and
control the modems parameters, change any user's name and
User Interfaces
4–36