Comtech EF Data DMD50 Installation And Operation Manual page 115

DMD50 Universal Satellite Modem
+20V SUPPLY
EXT CLOCK ACT
EXT REF ACT
EXT REF LOCK
CLEAR LATCHED ((ENTER))
BACKWARD ALARMS
NOTE: The following alarms identify the status of the alarms received from the distant satellite
end.
IDR1 SAT ALARM 1
IDR1 SAT ALARM 2
IDR1 SAT ALARM 3
IDR1 SAT ALARM 4
IBS SAT ALARM
T1E1 SATTERR ALM
MAP SUMMARY
NOTE: The following alarms identify the control status of the alarms transmitted to the distant
satellite end.
IDR1 SAT CNTRL
MN-DMD50– Revision 3
Allows the user to reset the latched alarms by pressing
<ENTER> on the keypad.
The following IBS and IDR Backward alarms only apply if the
IDR or IBS options are selected. The IBS and IDR Backward
Alarms are transmitted and received from the distant end of the
satellite link
{PASS, FAIL}
{PASS, FAIL}
{PASS, FAIL}
{PASS, FAIL}
{PASS, FAIL}
{PASS, FAIL}
{NONE, BK 1; BK 2; BK 1, 2; BK 3; BK 1, 3; BK 2, 3; BK 1,
2, 3; BK 4; BK 1,4; BK 2,4; BK 1, 2,4; BK 3,4; BK 1, 3,4;
BK 2, 3,4; BK 1, 2, 3,4}
Summary alarm is given when criteria meets the selection above.
{STNDRD, FRC ON, FRC OFF}
STNDRD: Set Alarm functions in a normal configuration
User Interfaces
4–31