Access Profile Table - D-Link DGS-3312SR Release 3.5 Manual

DGS-3312SR Stackable Gigabit Layer 3 Switch

Access Profile Table

Access profiles allow you to establish criteria to determine whether or not the Switch will forward packets based on the
information contained in each packet's header. These criteria can be specified on a basis of VLAN, MAC address or IP
address.
Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a frame the Switch
will examine, such as the MAC source address or the IP destination address. The second part is entering the criteria the
Switch will use to determine what to do with the frame. The entire process is described below in two parts.
To display the currently configured Access Profiles on the Switch, open the Configuration folder and click on the Access
Profile Table link. This will open the Access Profile Table window, as shown below.
Figure 4- 72. Access Profile Table window
To add an entry to the Access Profile Table window, click the Add button. This will open the Access Profile
Configuration window, as shown below. There are three Access Profile Configuration windows − one for Ethernet (or
MAC address-based) profile configuration, one for IP address-based profile configuration, and one for Packet Content
Mask-based profile configuration. You can Switch among the three Access Profile Configuration windows by using the
Type drop-down menu, and clicking on the Apply button. The Access Profile Configuration window for Ethernet is
shown below.
Figure 4- 73. Access Profile Configuration (Ethernet) window
The following parameters can be set:
103