DGS-3620 m/ mSW Rls. 1.02.000
12-17 show ip pim sparse-mode rp mapping
show ip pim sparse-mode rp mapping
Syntax
Description
Default
Command Mode
Usage Guideline
Example
Switch# show ip pim sparse-mode rp mapping
Group(s): 229.1.3.0/28
RP: 10.2.0.2
via bootstrap, priority 192, RP hold time: 150
Uptime: 00:17:37, expires: 00:01:52
Group(s): 229.1.5.16/28
RP: 10.90.90.90
via bootstrap, priority 192, RP hold time: 150
Uptime: 00:16:54, expires: 00:01:36
Group(s): 231.0.0.0/8
RP: 10.90.90.90
via bootstrap, priority 192, RP hold time: 150
Uptime: 00:16:54, expires: 00:01:36
Group(s): 233.0.0.0/8
RP: 10.90.90.90
via bootstrap, priority 192, RP hold time: 150
Uptime: 00:16:54, expires: 00:01:36
Group(s): 239.0.0.0/11, static
RP: 172.18.254.1
Field
Description
Groups
Group range mapping to the RP below.
RP
Address of the rendezvous point for that group.
RP hold
Hold time of the RP.
time
static
Group-to-mapping information from the static rendezvous-point configuration. Create by
command ip pim rp-address.
expires
Time (in hours, minutes, and seconds) after which the information about candidate RP
entry expires. If the router does not receive any refresh messages in this time, it discards
information.
CLI Reference Guide
Use this command to display RP mapping information.
None.
None.
User mode or Privileged mode.
This command is used to display PIM-SM RP mapping information.
Display PIM-SM RP mapping information.
show ip pim sparse-mode rp mapping
410