132
ADJUSTMENT
To change the angle of seat tilt:
Position front and rear height
adjusters differently.
Install the rider's seat.
(
132)
Installing rider's seat
with seat heating
Connect plug connection 1
for the seat heating.
Engage rider's seat 1 in seat
mounts 2 on left and right
and lower it on to the motor-
cycle.
Applying pressure to the rear
of the seat, push the rider's
seat slightly forward and then
OE
press it firmly down until the
lock engages.
RALLYE SEAT
Removing Rallye seat
Unlock seat lock 1 with the
ignition key by turning the key
clockwise and holding the key
in this position.
Lift seat 2 at the rear and re-
lease the ignition key.
Remove the seat and place it,
upholstered side down, on a
clean surface.