Ignition Coil Removal - Husqvarna TC 250 2010 Workshop Manual

- Loosen the two retaining screws (2) and remove the regulator (3).

Ignition coil removal

- Remove: saddle and fuel tank as described in the relevant paragraphs.
- Remove the spark plug cap (1).
- Remove the retaining screws (2) and then the coil (3).
Part. N. 8000 H1489 (10-2009)
GENERAL PROCEDURES
E.19
2
3
2
3
1
TE-TXC
H00658
TE-TXC
H00660