Ignition System; Ignition Coil - Checking The Secondary; Winding; Checking The Spark Plug Connector - Husqvarna FE 350 2014 Repair Manual

22

IGNITION SYSTEM

22.1
Ignition coil - checking the seconds
22.2

Checking the spark plug connector

2
22.3

Alternator - checking the stator winding

winding

Condition
Ignition coil cylinder 1 is disconnected.
Spark plug connector cylinder 1 has been removed.
Ignition coil cylinder 1
Measure the resistance between the specified points.
0
Ignition coil cylinder 1 pin 2 (-) - Ignition coil cylinder 1 pin 3
Ignition coil
Secondary winding resistance at:
20 °C (68 °F)
If the displayed value does not correspond to specifications:
- Change the ignition coil.
601171-10
Condition
Spark plug connector cylinder 1 has been removed.
Measure the resistance between the specified points.
Measuring point 1 - Measuring point 2
Spark plug connector
1
Resistance at: 20 °c (68 °F)
If the specification is not reached:
- Change the spark plug connector.
601170-10
Condition
The stator is disconnected.
Preparatory work
- Remove the seat. (.- p. 76)
Main work
EZ
Stator winding, measurement I - check the resistance
Measure the resistance between the specified points.
0
Stator, connector
Alternator
Resistance of stator winding at:
20 °C (68 °F)
If the value displayed does not meet specifications:
- Change the stator.
601211-10
Stator winding, measurement II - check the resistance
Measure the resistance between the specified points.
0
Stator, connector
Alternator
Resistance of stator winding at:
20 °C (68 °F)
If the value displayed does not meet specifications:
- Change the stator.
-
check the secondary winding resistance
10.8 ... 16.2 kn
1
3.75 ... 6.25 kn
pin - Stator, connector
EZ 1
0.368 ... 0.552
I
pin - Stator, connector
EZ 1
0.368 ... 0.552
I
19s
pin
EZ 2
n
pin
EZ 3
n