Husqvarna TC 250 2010 Workshop Manual page 95

- Remove the engine mounting bolts (39) using a 12 mm wrench on the left-
hand side and a 10 mm wrench on the right-hand side.
- Loosen the swinging arm axle nut (40) using a 22 mm wrench; pull out the axle
from the right-hand side of the engine and pull the swinging arm rearwards
to facilitate engine removal.
- Lift the engine, tilt it to the left and remove it from the motorcycle.
- Place the engine on a rotating stand to perform the procedures described in
Sections F-G-H.
Part. N. 8000 H1489 (10-2009)
GENERAL PROCEDURES
E.29