Cylinder Head Removal - Husqvarna TC 250 2010 Workshop Manual

ENGINE DISASSEMBLY

Cylinder head removal

- Remove the head cover as described in the relevant paragraph.
- Remove the camshafts as described in the relevant paragraph.
- Remove the chain tensioner (1) as follows:
• Loosen the screw (2) with an 8 mm wrench.
• Turn the screw (3) fully clockwise with a flat head screwdriver until locking
it so as to release the spring.
• Loosen the two screws (4) using an 8 mm wrench and remove the chain
tensioner (1).
F.10 Part. no. 8000 H1489 (10-2009)