Changing Handlebar Position And Height - Husqvarna TC 250 2010 Workshop Manual

SETTINGS AND ADJUSTMENTS

Changing handlebar position and height

Handlebar position (a) and height (b) can be modified to better suit your personal
preferences. To perform these adjustments, remove the handlebar clamp bolts
(3) and (4), and then remove the handlebar upper (1) and lower (2) clamps.
a) Changing handlebar position
Rotate the lower clamp by 180° to move handlebar position forward or back-
ward (10 mm - 0.04 in.).
b) Changing handlebar height
Remove the lower spacer (A) and replace the screw (4) with a 65 mm long
screw.
When finished, tighten the bolts (3) to 2.75-3.05 kgm (27 -30 Nm; 19.9-22 lb/ft)
and the bolts (4) to 2.0-2.2 kgm (19.6 -21.6 Nm; 14.5-15.9 lb/ft).
D.32 Part. N. 8000 H1489 (10-2009)