Husqvarna TC 250 2010 Workshop Manual page 90

GENERAL PROCEDURES
- Slacken the clamp (11) and disconnect the hose (12) connecting the radiators
to the engine. Drain all fluid.
- Slacken the clamp (13) and disconnect the hose (14) connecting the radiator
to the water pump.
- Remove the oil sump guard, place a pan under the engine and remove the
oil filler cap (15); remove the oil drain plug (16) with a 12 mm wrench and
drain the oil.
E.24 Part. N. 8000 H1489 (10-2009)