Needle Assembly (Tc); Throttle Valve (Tc); Taper Needle (Tc) - Husqvarna TC 250 2010 Workshop Manual

ENGINE OVERHAUL

Needle assembly (TC)

Check needle (9) and valve seat (c). If worn (a): replace needle. If dirty: clean.

Throttle valve (TC)

Check that the valve moves freely.
Repair or replace if stuck. Insert the throttle valve (5) into carburettor body and
make sure that it moves freely.

Taper needle (TC)

Check the taper needle (6).
If bent or worn: replace.
Standard setting: 6th groove.
G.24 Part. N. 8000 H1489 (10-2009)