Air Filter Check (Te - Txc); Air Filter Cleaning - Husqvarna TC 250 2010 Workshop Manual

Hide thumbs Also See for TC 250 2010:
Table of Contents

Advertisement

Air filter check (TE - TXC)

Turn the rear fixing (1) counter clockwise, remove it and extract the saddle releasing
it from the front retaining screw.
Take out the battery (A) and leave it hanging on the side of the motorcycle.
Remove the screw (3), remove the complete air filter (4) and separate filter (5) from
intake silencer (6).

Air filter cleaning

Wash the filter with a specific detergent (see "Capacities" table in Section A)
then dry it fully (wash filter with gasoline only in case of need). Plunge the filter
in special oil for filters (see "Capacities" table in Section A), then wring it to drain
superfluous oil.
Do not use fuel or a low flash-point solvent to clean the filtering element.
A fire or explosion could result.
Clean the filtering element in a well ventilated area and do not allow
sparks or flames anywhere near the working area.
Part. N. 8000 H1489 (10-2009)
SETTINGS AND ADJUSTMENTS
D.19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc 250 2009Txc 250 2010

Table of Contents