Disassembling, Servicing And Assembling The Rear Shock Absorber; Spring Servicing; Shock Absorber Inspection - Husqvarna TC 250 2010 Workshop Manual

REAR SUSPENSION

Disassembling, servicing and assembling the rear shock absorber

Clean the shock absorber before disassembly.

Spring servicing

Measure the spring in place before removal.
Spring removal: clamp the shock absorber in a vice taking care to avoid distorting
it. Slacken lock ring nut and ring nut, spring retainer and spring.
Measure spring free length.
SERVICE LIMIT: 245 mm (SMR), 255 mm (TE-TXC 250),
+/-1.5 +/-1.5
255 mm (TE-TC-TXC 450, 510).
+/-1.5
Change the spring if length is outside the service limit.

Shock absorber inspection

Visually inspect the shock absorber and look for oil leaks or other issues. Replace
the shock absorber if needed.
Part. N. 8000 H1489 (10-2009)
J.6